Volumen 13 2007

Vol 13 No 1

Special issue: 4th BALKAN CONFERENCE ON METALLURGY - Part II

Preface
Best IT publication for 2007-Introductory and plaque
Çaldag Nickel Laterite atmospheric heap leach project Anne Oxley, Nursun Sirvanci, Simon Purkiss	5
Use of electromagnetic equipment for slab and thin slab steel continuous caster Olof Sjoden, Maurizio Venini	11
Optimization of non-transparent non-crystal silica production process Sanja Martinovic, Milica Vlahovic, Velislav Vidojkovic, Tamara Boljanac, Predrag Jovanic	21
Electrolytic recovery of copper from highly contaminated wastewaters Srecko Stopic, Bernd Friedrich, Anugerah Widigdo	27
Pollution prevention and control techniques in the copper industry Tatjana Apostolovski-Trujic, Vojka Gardic, Sasa Ivanovic	35
Characterization of wastewater streams from Bor site Marija Korac, Zeljko Kamberovic	41
Phase composition, structure and magnetic behaviour of low neodymium Nd-Fe-B permanent magnets T. Žák, N. Talijan, V. Cosovic, A. Grujic	53
The mechanical behavior and shape memory recovery of Cu-Zn-Al alloys Vanja Asanovic, Kemal Delijic	59
Characterization of thermal shock damage in cordierite-mullite refractory materials by non-destructive methods D. N. Boccaccini, Elie Kamseu, T. D. Volkov-Husovic, M. Cannio, M. Romagnoli, P. Veronesi, C. Leonelli, I. Dlouhy, A. R. Boccaccini	65
Synthesis and sintering of Cu-Al2O3 nanocomposite powders produced by a thermochemical route Z. Andic, M. Korac, M. Tasic, Ž. Kamberovic, K. Raic	71
The influence of thermo mechanical treatment on recrystallization of AlMg4.5Cu0.5 alloy Lj. Radovic, M. Nikacevic, M. Popovic, E. Romhanji	83

Vol 13 No 2

Processing and some applications of nickel, cobalt and titanium-based alloys Milan T. Jovanovic, Borislav Lukic, Zoran Miskovic, Ilija Bobic, Ivana Cvijovic, Biljana Dimcic	91
The new approach of the production technique of discontinuous Cu-C composite R. Rudolf, I. Anžel, V. Lazic, D. Stojic	107
Earth mover's distance region-based image similarity modeling applied to mineral image retrieval Mladen Jovic, Yutaka Hatakeyama, Zoran Steji c , Srecko Stopic, Seidl Thomas, Dragomirka Oljaca	117
Bake hardening of a low carbon steel for automotive applications A. Momeni, K. Dehghani, S. Abbasi , M. Torkan	131
Conditions for balancing evaporative pattern - refractory coating - liquid metal - sand system Zagorka S. Acimovic-Pavlovic	139
Hot- dip zinc coated products - supply and demand domestic market Toplica Pavlovic	147
Terminology for nanomaterials and nanotechnology Branko Matovi c , Snežana Boskovic	155
Workshop- Prevention of Contamination from Mining & Metallurgical activities in SERBIA 10.12.2007.
Advertisment-Zlatarna Celje dd

Vol 13 No 3

Characterisation of thin Ag and Cu metallic strips Rebeka Rudolf, Ivan Anžel, Hugo Bosio, Dragoslav Stamenkovic, Karlo Raic	165
Metadynamic Recrystallization of a Precipitation hardenable stainless steel Momeni, A. Shokuhfar, S. M. Abbasi	179
Dynamic failure analysis of laminated composite plates J. Eskandari Jam, N. Garshasbi Nia	187
Comparative study on particles bonding of tungsten samples which were produced by powder metallurgy method and underwater explosive compaction technique M. Zohoor , A. Mehdipoor	197
An improved mehod for thermal stability behavior characterization of silicon carbide / cordierite composite material M. Posarac, M. Dimitrijevic, J. Majstorovic, T. Volkov -Husovic, A. Devecerski, B. Matovic	203
Korelacija parametatra kompokasting procesa, strukture i svojstava kompozita sa osnovom od legure ZnAl25Cu3 Sandra Kastelec-Macura, Ilija Bobic, Zagorka Acimovic-Pavlovic, Karlo Raic	213
Optimizacija parametara livenja klipova koriscenjem softverskog paketa Magmasoft Srecko Manasijevic, Zagorka Acimovic-Pavlovic, Radomir Radisa	221
Tehnologija procesnog pristupa-osnova za kontinuirano unapredenje procesa u metalurskom inženjerstvu M. Ðuricic, Z. Acimovic-Pavlovic, R. Ðuricic	231
Jubilee-Prof. dr Borivoje Mišković
Report-III DPSM
Advertisment-Bosio doo

Vol 13 No 4

Special issue: III International Conference "DEFORMATION PROCESSING AND STRUCTURE OF MATERIALS" Part I

Preface-Guest Editor Prof. dr Nenad Radović
Behaviour of Fe-Cr based alloys under neutron irradiation M. Matijasevic, A. Almazouzi	245
Residual stresses in cold rolled narrow strips: experimental measurement - FEM simulation Nebojsa Tadic, Mitar Misovic	251
The influence of thermo- mechanical treatment and chemical composition on recrystallization of Al - Mg alloys Lj.Radovic , M.Nikacevic, M.Popovic, E.Romhanji	259
Phase equilibria investigation and characterization of the Au-In-Sb system Lidija Gomidželovic, Dragana Živkovic , Nada Talijan, Dragan Manasijevi c , Vladan Cosovic, Aleksandar Grujic	269
Approximation of material behaviour of PLLA polymer in HA P /PLLA biocomposite material using nanoindentation and finite element method I. Balac, D. Aleksendric, C.Y. Tang, C.P. Tsui, P.S. Uskokovic and D. P. Uskokovic	277
Development of a collision energy absorber of a passenger train Jovan Tanaskovic, Vojkan Lucanin, Nenad Radovic	287
A model for predicting fracture toughness in overaged 7000 alloy forgings Maja Vratnica, Zorica Cvijovic, Marko Rakin, Ivana Cvijovic	293
Micromechanics of a carbon nanotube turf and numerical modeling of nanoindentation H. Radhakrishnan, S.Dj. Mesarovic, C.M. McCarter, D.F. Bahr, C.D. Richards	301
Characteristics of copper and copper - Al2O3 composites prepared by high - energy milling Viseslava Rajkovic, Dusan Bozic, Milan T. Jovanovic	309
Clay and alumina grain size effect on high alumina refractories Marina Jovanovic, Ana Beros	317
High temperature oxidation of metals and alloys Ivan Anžel	325